The information presented is intended to demonstrate a Stryker product. A surgeon must always refer to the package insert, product label and/or instructions for use, including the instructions for cleaning and sterilization (if applicable), before using any Stryker product. Upon seating of the final cylindricalreamer in the canal, slide the resection guide assem - bly over the shaft of the reamer until it stops (Fig. 6).Align in the proper orientation and tighten down with the thumb screw. The Cutting Guide is then slid over the post. The four-year surveillance 2015 - Hip fracture (2011) NICE guideline CG 124 [ 1] has, however, addressed the lower cost of monopolar prosthesis with no difference in outcomes between monopolar and modular. In the 2019 NHFD report, the cost difference between cemented hemiarthroplasty implants differed by means of £277 for the ETS® and £747 Taperloc Complete Hip System Accessing the Femoral Canal Using the surgeon's preferred technique, resect the . femoral head. Access the femoral canal with the straight box or offset chisel to determine the orientation of the femoral canal and access the lateral section of the This technique will take the reader through the modified Hardinge approach to the hip and insertion of a cemented Exeter Trauma Stem (ETS) hemiarthroplasty. These vast majority of these fractures occur in elderly, infirm osteoporotic patients and attention to medical management and multidisciplinary team working is essential. Newer techniques, such as Mako, may preserve more of your natural bone. 1 And different approaches may minimize the impact surgery has on soft tissue and muscles. 2 In other words, today's jointreplacement techniques may mean less pain and a quicker return to your daily activities. 3,4 But joint replacement surgery does have risks. Learn more Place the Starter Reamer on the exposed trochanteric fossa and proceed down into the shaft along its axis to the appropriate depth and align to the center of the knee. The Starter Reamer should be inserted such that the appropriate marking corresponding to the pre-operatively selected stem size correlates to the depth of the medial resection point. The Bipolar Prosthesis is intended for use as a hemiarthroplasty, therefore the acetabulum is conserved since the main articulation occurs between the femoral head and the Bipolar Prosthesis. Note: Metal, Ceramic and OXINIUM™ Femoral Heads can be used with the Bipolar Prosthesis in the following sizes: • 22 S/+0, 22 M/+4, 22L/+8 The Summit™ Tapered Hip System's comprehensive set of implants and instruments treat a wide range of patients with differing needs. The Summit system features premium cementless and cemented stems, as well as stems that are specifically designed to meet the challenges of today's healthcare environment. All Summit stems utilize common • Templating is an important guide in the routine process of pre-operative planning. Intra-operative feedback should be used to establish final leg length and hip stability. • Patient positioning is key to obtain adequate cup positioning and hip stability. • A lateral x-ray should be used to assess stem size. individual markets. Please contact your Stryker representative if you have questions about the availability of Stryker products in your area. Stryker Corporation or its divisions or other corporate affiliated entities own, use or have applied for the following trademarks or s