The Synology DS216se is a budget-friendly 2-bay NAS aimed at home users, be it small offices or media enthusiasts. The NAS is highly efficient, using a little less than 14W while the drive is being accessed. The NAS comes with a Marvell Armada 800MHz CPU, 256MB of DDR3 RAM, and up to 16TB of capacity. In Storage Manager click on " Storage Pool " on the left and then click on Action > Repair: Confirm the hard drive you're going to use to repair the Storage Pool and click on " Next ". Click on " OK " to acknowledge that any data on the new drive will be erased. Finally, click on " Apply " to confirm and start the repair. Synology Drive Server is an all-round solution for file management, sharing, and synchronization. Once an administrator has enabled Synology Drive Server , users can use Synology Drive as a file portal and access it via web browsers Synology Drive Synology Drive (Server) Synology Drive Client Synology Drive ShareSync Quick Start. The units support hot swap, so users can just slide the drives in for contact with a back panel SATA connection, and automatically the drive will spin up and be initialized or able to initialize the volume through the NAS control software which we will look at next. The manual for the DS212 can be downloaded as a PDF, and goes into detail Check if your Synology NAS is unresponsive. Long press the power button on your Synology NAS for at least three seconds or until you hear a beep sound. 1 The outcomes may be as follows: Your Synology NAS will emit a beep sound and successfully shut down the system. 2. Your Synology will emit a beep sound but will be unable to shut down the FS3600. 24 bays. 12-core CPU, Turbo Boost up to 2.7 GHz. Over 195,000 iSCSI 4K random write IOPS. Scale up to 72 SAS/SATA SSDs. NEW. Your Synology NAS comes with a power cable, an Ethernet cable, drive mounting screws, and, if you have a higher end model, it may also come with hot-swap drive bay trays, and a second Ethernet cable (the high end DiskStations support dual network cards for increased network throughput). Before we take a look at the actual unit and how to fill Look at your Synology NAS and count from the left. Remove the failed drive from the NAS. (Power down the enclosure if it doesn't support hot-swapping.) Replace the failed drive with the new one on If you want to shutdown or restart your Synology NAS via the web-based interface, you'll need to log in and look to the icons in the upper right corner. Click the options menu, indicated by the little head and shoulders bust icon. From there you can select either "Restart" or "Shutdown" to perform the desired task. Synology HDD Firmware Update. Fixed an issue which hard drive may not be successfully detected by the NAS when installed on SA3400, SA3600, RS18017xs+, RX1217sas or RX1222sas. Fixed an issue where the hard drive might be unrecognized when an abnormal power outage occurs during its firmware update process. Enhanced the accuracy of SMART quick test. Synology DS218 comes with a new 64-bit quad-core processor to deliver excellent data transfer speed and supports rich applications such as multimedia streaming, and file syncing and sharing. Data can be further protected with RAID 1 disk mirroring support. Download Datasheet CPU Quad-core 1.4GHz Memory 2GB DDR4 Performance The Synology DiskStation DS214+ is a 2-bay NAS server with 10TB of max capacity (2x 5TB HDDs). It is for SMBs that need to share files across multipl