GDS-806 and GDS-810 series provides a valuable "adjustable probe compensation signal function". The range for adjustable probe compensation signal is adjusted from 1kHz to 100kHz, 1kHz per step; and duty cycle is adjusted from 5% to 95%, 5% per step. This function can satisfy user with the probe compensation easily and accurate. 10 My first digital Scope was a GW-Instek GDS-1022. GDS-1022 GDS-1042 GDS-1062 GDS-1102 5.6' TFT Color LCD 25MHz 40MHz 60MHz 100MHz 2 SELECTION GUIDE The Next Generation of Portable Oscilloscope. INSTEK ELECTRONIC (SHANGHAI) CO., LTD. 8F, of NO.2 Building, No.889 Yish an. GDS-1000 Series DSO New Product Announcement. GW Instek GDS 2000 Series. Configuring the USB Interface Panel operation 1. Connect the USB cable to the USB slave port on the rear. 2. When the PC asks for the USB driver, select dso_cdc_1000.inf which is downloadable from the GW website, gwinstek.com.tw, GDS1000 product corner. 3. On the PC, activate a terminal application such as MTTTY (Multi-Threaded TTY). About. gds2000tools is a set of free software tools for usage with the GW Instek GDS-2000 series oscilloscopes (GDS-2062, GDS-2064, GDS-2102, GDS-2104, GDS-2202, GDS-2204). The GDS-1000 Series offers 100MHz, 60MHz, 40MHz and 25MHz digital storage oscilloscopes with 5.6" color TFT LCD displays. With dual sampling modes, a 4000 point record length, a real-time sampling rate of 250MSa/s and an ET sampling rate of 25GSa/s, the GDS-1000 Series DSO provides an excellent balance of performance between memory length and sampling speed. GDS-1000-Product-GW Instek Sales Contact Print Share Features 100/60/40/25 MHz Bandwidth with 2 Input Channels 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling 4k Memory Length per Channel Peak Detect as Fast as 10ns Save/Recall of 15 Front Panel Settings & Waveforms 5.6" TFT Color Display 19 Auto Measurements Author Topic: Instek GDS-1062A micro review (Read 37402 times) 0 Members and 1 Guest are viewing this topic. McPete. Regular Contributor; Posts: 163; Country: Layout Designer, AKA eCAD monkey; Re: Instek GDS-1062A micro review « Reply #25 on: October 01, 2010, 10:32:10 am GDS-1000 Series Features * 100/60/40/25 MHz Bandwidth with 2 Input Channels * 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling * 4k Memory Length per Channel * Peak Detect as Fast as 10ns * Save/Recall of 15 Front Panel Settings & Waveforms * 5.6" TFT Color Display * 19 Auto Measurements * Arithmetic Operators - Add, Subtract, FFT But nowadays I would like one only as a hobbyist. Well I found a GW Instek GDS-1062A for $210. Not great, but probably far better than my Tektronix Type 545B anyway. So I thought that would be the end of the story and my search was over since I purchased it (currently in the mail). Then I found a LeCroy WaveAce 222 for $150. User manual x1, Power cord x1, Probe GTP-060A-4 or equivalent : 60MHz (10:1/ 1:1) Switchable passive probe for GDS-1062A (one per channel) Probe GTP-100A-4 or equivalent : 100MHz (10:1/ 1:1 GDS-1022 GDS-1042 GDS-1062 GDS-1102 5.6" TFT Color LCD 25MHz 40MHz 60MHz 100MHz 2 SELECTION GUIDE The Next Generation of Portable Oscilloscope 250MSa/s (Real-time Sampling) & 25GSa/s (Equivalent-time Sampling) 4k Points per channel GOOD WILL INSTRUMENT CO., LTD. Global Headquarters No. 7-1, Jhongsi ng Road, Tuche City, Taipei County 236, Taiwan 51549 GDS-1042 GW Instek Digital Storage Oscilloscope 40MHz 2 Color Display (234 x 320), 5.6LCD 2.5Kg/pc 51550 GDS-1062 GW Instek Dig