Call ETC. They can open your file and decipher it for you. It should have been in the project specifications that the contractor provide basic walk-through guide and a full set of drawings/cut sheets/manuals, but a lot of schools are playing it pretty fast and loose out there. Contact the ETC project management department for ordering instructions. To replace a button cap, first remove the bezel and button cap from the station electronics. 3: Install the new button cap onto the button by aligning the grooves of the cap to the button, then sliding th e it in place starting at the hinge. ETC Installation Manual ColorSource® Spot ColorSource Spot Page 1 of 4 Electronic Theatre Controls, Inc. Corporate Headquarters Middleton, WI, USA Tel +608 831 4116 Service: (Americas) service@etcconnect.com London, UK Tel +44 (0)20 8896 1000 Service: (UK) service@etceurope.com Rome, IT Tel +39 (06) 32 111 683 Service: (UK) service@etceurope.com • constructed of 16-gauge cold-rolled steel, finished in fine-textured, black powder coat • supports wall-mounting or plenum installation • rotary dials for selection of space and starting zone number • class one voltage barrier prevents access to line-voltage wiring with front panel removed • optional voltage divider allows for separation … Welcome to the installation manual for the Unison®ERn rack mount external processing enclosure. This manual contains the procedures for safe and efficient installation of ERn series processing racks, including wire termination and option kit installation. ETC Installation Guide ColorSource® PAR v1.7 Corporate Headquarters Middleton, Wisconsin, USA Tel +608 831 4116 Service (Americas) service@etcconnect.com London, UK Tel +44 (0)20 8896 1000 Service: (UK) service@etceurope.com Rome, IT Tel +39 (06) 32 111 683 Service: (UK) service@etceurope.com Holzkirchen, DE Tel +49 (80 24) 47 00-0 Service: (DE) techserv-hoki@etcconnect.com included in this manual is an introduction, computer requirements, manual conventions, light manager software installation, understanding the display, configure system, changing system properties, programming control stations, customize fader and preset recall stations, record presets, lcd stations, ir stations, programming rooms with moving … Unison. Sort By: Quick view. DMX Output Driver Chip for Legacy Unison $2.76. Quick view. Z423-F $2.76. Quick view. Echo Relay Panel Mains Feed Fuse $7.20. Quick view ETC, Inc. 3031 Pleasant View Rd Middleton, WI 53562 United States of America Call us at (608) 831-4116 This manual contains the procedures for installation of the Echo Relay Panel Feedthrough (ERP-FT). Model # Description Relay Type Voltage Dimension (inches) ERP24-F242 Small panel with 24 1P relays WR6161-81 120V, 230V, or 277V 50/60Hz 17.14 x 6.3 x 26.24 Model# Description Relay Type Voltage Dimension (inches) The voltage at the LCD should be at least 9.5Vdc. If the voltage is too low the LCD will get into a power cycling mode. The cycle is created when the backlight circuit draws more current during the power-up stage, causing the voltage to drop to 5Vdc and reset the unit. The unloaded output voltage of the AUX control power supply is set at 24Vdc Installation and User Manual • Other components in your system (Unison®, other consoles, etc.) Americas United Kingdom ETC, Inc. ETC Ltd Technical Services Department Technical Services Department 3031 Pleasant View Road 26-28 Victoria Industrial Estate Middleton, W