According to his report, the material upon deep cryogenic treatment contains 22% more carbides per unit volume than the conventionally quenched and tempered one. It is a onetime permanent process in applications, after cryogenic treatment. The application of cryogenic treatment for improved wear life is dependent on part chemistry and function. CRYOGENIC GRINDING AND ITS APPLICATIONS A Minor Project Report Submitted to the VEER SURENDRA SAI UNIVERSITY OF TECHNOLOGY,BURLA In partial fulfillment of the requirements for the award of BACHELOR OF TECHNOLOGY IN MECHANICAL ENGINEERING BY DEBASMITA MOHAPATRA (12010106) AVINASH NAYAK (12010065) ADARSH PANDA (12010079) BANAMALI MAHANTA (13020043) FOR THE YEAR 2015-2016 Under the Esteemed Cryogenics Deep Cryogenic Treatment of Metallic Materials Seminar I Authors: Patricia Jovičević-Klug Institute of Metals and Technology/Max-Planck-Institute for Iron Research Abstract Deep #1 techlib 10-03-2013, 03:19 PM Here is a collection of Mechanical Engineering Seminar topics taken in 2012-2013 NEW! seminar topics 2013 and Mechanical Engineering forum A Hypersonic Hybrid Vehicle Abrasive Blast Cleaning Active Electrically Controlled Suspension Active Front Lighting System Active roll-over protection system in Automobiles What is cryo-treating? Cryo-treating is a slow process of taking materials down to -300° F, typically in liquid nitrogen, and gradually bringing them back to room temperature over several days. The end result is considerably longer life with less internal stress, more flexibility and higher tensile strength for everything from end mills Hardening is a heat treatment process carried out to increase the hardness of Steel. It consists of heating Steel components to the temperature within or above its critical range. Held at this temperature for a considerable time to ensure thorough penetration of heat at this temperature well inside the component and then allowed to cool Seminar cryogenic heat treatment process. 2 November 2016 in this article, written by Dr. John Weisend, was originally published in the volume 32 number 5 cold emission facts as part of its series, defining Cryogenia. Cryogenic treatment or cryogenic hardening as ita also calls is simply modification of a material or component using Latest Seminar Topics For Automobile Engineering 2014 Collection of latest seminar topics for Automobile engineering 2013. Download full latest seminar topics for Automobile engineering 2013. Automobile Engineering. Antimatter. Apache Helicopter. Application of Nitrous Oxide in Automobiles. Applications of Mobile Robotic System. Atomic Battery. CORE - Aggregating the world's open access research papers The four process parameters, namely, hardening temperature (A), soaking period (B), tempering temperature (C), and tempering period (D), are considered for the optimization study. The optimum D2 steel is an air hardening, high-carbon, high-chromium tool steel. It has high wear and abrasion resistant properties. It is heat treatable and will offer hardness in the range 55-62 HRC, Cryogenic treatment is a supplementary subzero heat treatment and an add-on-process which affects entire cross-section of the tool material. This is a comprehensive list of presentation topics for Mechanical Engineering students and professionals. These presentation topics can be used for Paper presentations, Seminars, workshops and for group discussions. Latest Colle