Replies to This Discussion

Permalink Reply by Jerry Schmidt on January 28, 2015 at 9:24am

Hello Jeffsa,

Currently AMD processors are not supported. I have not heard of a time frame when they will be.

• ▶ Reply

Permalink Reply by Jeffsa Pura on January 29, 2015 at 5:29am

Thanks Jerry. Please correct me if I am wrong in my below statement.

1. If I run the DXi V1000 using VMWare Player on a Windows Machine having AMD Processor, DXi V1000 will run but it is not supported. 

Am I correct or wrong? If this "statement 1" is correct, I would like to try it; ofcourse the risk is on me.

If the "statement 1" is wrong, please check if my next statement is correct or wrong.

2. If I run the DXi V1000 using VMWare Player on a Windows Machine having Intel Processor, DXi V1000 will run and it is supported.

If the above "statement 2" is correct, I would like to try it; If its wrong, are you telling me that DXi V1000 can only be hosted on an ESXi hypervisor (on Intel platform)?

Please correct me. Thanks in Advance.

• ▶ Reply

Permalink Reply by Jerry Schmidt on January 29, 2015 at 8:07am

I checked the DXI v1000 install guide.

Below are the requirements. So to answer your question, both statements are correct.

If you try installing and booting the DXi v1000 on an AMD server the DXI v1000 will most likely not boot fully.

However you can use VMWare Player 9 on a server with an i7 quad-core Intel processor to host the DXI v1000.

• ▶ Reply

Permalink Reply by Mark Thacker on March 11, 2015 at 1:05pm

The V1000 will not work on an AMD processor because it is compiled to use the specific SSE instruction set that is present only on the Intel chipset.

The product will not complete it's boot process if you attempt to run it on an AMD chipset.

• ▶ Reply

Permalink Reply by Jeffsa Pura on March 13, 2015 at 3:31pm

Thanks for your precise reply Mark. This answers my first question.

Now my question on VMPlayer..

I have purchased Intel processot i7-4790K with Asus motherboard Z97K. So, to have everything on a single machine. I have to install Windows 7 as the host Platform OS.  Then in that I have installed VM Player. within VM Player, I have installed ESXi 5.5.

Now my plan is to install DXi V1000 on ESXi platform. I guess it will work but with performance penalty (since works on two virtualization layers.

To avoid the performance penalty, can I just run DXi V1000 appliance on VMPlayer it self?  or is it a must that it should run on top of ESXi platform only?

Thanks In advance.

• ▶ Reply

Permalink Reply by Mark Thacker on March 16, 2015 at 9:21am

Yes, you can run the V1000 directly on top of VMware Player.

Note that our own vmPRO product will NOT work in VMware Player in general because of it's requirements to interface with the ESX api. However, DXi V1000  does not have this requirement.

So, yes it will work.

• ▶ Reply

Permalink Reply by Martina Li yesterday

Learned a lot more, very detailed.

——————————————————————————————————————————————skysmotor.co.uk sells the following products online: ac servo motor, geared stepper motor, stepper motor drivers, planetary gearbox and can be purchased online if required.

• ▶ Reply