General description. SINAMICS S150 cabinet units have been designed for variable-speed drives in machine building and plant construction. They are particularly suitable for use with variable-speed drives with high requirements regarding dynamic response and speed accuracy, frequent braking cycles with high braking energies, and four-quadrant operation. SINAMICS - Low Voltage Engineering Manual SINAMICS G130, G150, S120 Chassis, S120 Cabinet Modules, S150 Version 4.0 x May 2008 SINAMICS Drives s Modules or controlled via NX. If the subsystem being considered only uses the drive-integrated safety functions according to Chapter 4 of the "SINUMERIK 840D sl /SINAMICS S120 Safety Integrated" Function Manual (only drive-integrated STO/SBC/SS1 via terminals), then the NCU is only relevant, if at SINAMICS S120 Safety Integrated Extended Functions The extended safety functions integrated in the SINAMICS S120 drives are to be controlled from a TM54F via hardware signals. The drives belong to A&D Safety Integrated Page 8/42 MC-FE-I-005-V11-EN Performance Level (PL) i Safety Integrity Level (SIL) Safety Evaluation Tool (SET) dla oceny PL i SIL ; Safety Integrated w SINAMICS S120: funkcje podstawowe i rozszerzone ; Sterowania praca napedu wykorzystujacego funkcje bezpieczenstwa poprzez Terminal Module TM54F i DRIVE-CLiQ Learn how you can quickly and easily commission the Safety Integrated functions of the SINAMICS S120 with Startdrive. How it works in the TIA Portal will be explained with two demo cases: a Sinamics G120 Safety Integrated Function Manual 3. Safety Integrated basic functions. 4. Safety Integrated Extended. Functions. 5 SINAMICS S120 Equipment Manual for Control Units. Additional System. Siemens SINAMICS G120 Operating Instructions Manual: Safe Torque Off (sto) Safety Integrated Function Manual, see Section Manuals for your Safety Integrated basic functions 9.8 Acceptance test and certificate. Description of faults and alarms. Note. The faults a