using a hand router as a jointer
router straight edge jig
router table
jointing with a handheld router
edge jointing long boards with a router
router bits
glue joint router bitjointing with a table saw

19 Oct 2017 Be sure to keep the guide bushing pressed tightly against the edge of the template. Guide And the router is the tool to use to cut these joints. 5 May 2014 Feed the router against the straightedge from left to right to joint the board. Set the pattern bit so that the bearing rides against the straightedge. ii) Using the router table Jointing on a router table is like doing so on a jointer except that the stock is moved on its face side horizontally. 28 May 2014 25 Oct 2005 The method depends on a simple aluminum-angle-edged guide board and a If you don't have a jointer, this easy-to-use jig lets you joint boards with a router. Enfield Cupboard with Hand Tools featuring Chris Gochnour. Place your straightedge on top of the board you're jointing. Set the straightedge guide back on the board so you remove only 1/16 in. of stock at a time. This technique is easier if your router has a base with a straight edge, but it also works with a round base. Your grandad may have reached for a hand plane to flatten boards without a As with jointing on the tablesaw, one edge of the workpiece must overhang the cut thick stock, use the tablesaw sled as a straightedge to guide a flush-trim bit. The router is a very easy tool to set up and use for jointing edges and in these next steps I will take you through the process of jointing boards with your router. 18 Jan 2007 With proper setup and technique an edge can be made reasonably makes them far more manageable for jointing regardless of the tool or8 Feb 2019 You can use a router to joint two boards at once. Clamp the guide board so the bit takes an equal amount off both boards, about 1/32 in. Amazing..the efforts some people will go thru to avoid using a hand plane. 20 Mar 2012