Is It Possible to Convert Transmission from Manual to Auto? Well, you have already got the answer. But, how to do it? If it's a modern car, dated at or after the mid-1990s, the process will require something more than just changing the transmissio Auto hubs are alot more expensive to replace. When the hubs go on my F150 I plan to convert to manual hubs. Manual hubs can sometimes be a pain because some people hate the thought of having to get out and lock them, but if poor weather is expected then just leave them locked. Hey guys, I just bought a dana 60 from a 1978 1 ton truck.(going in a 91 4runner) From what i understand the truck had a np 203 tcase in it and since i dont have manual locking hubs i assume it means i have automatic hubs. I am in the process of converting my 87 4runner to Manual Aisins from my stock auto hubs. I have searched around on more than one forum and have only found parts and pieces on how to do it. I have taken apart most of the hub, but am stuck at the part where you find the torx screw. I seem to have a clutch ring of some sort that I cannot get off. 1993 Ford Bronco XLT 5.0 V8 Im a young bronco enthusiest so I dont know everything about 4wheel drive, but i do know automatic hubs can put you in some stuck situations and id like to convert to manual locking. where do I start and where can i find parts and/or kits? Im also in the beginning stag Toyota automatic hubs need a two nut, plus a claw washer conversion kit to use manual hubs. My Warns have worked great for me and I have heard good things about stock hubs as well if you wanna go to the wrecker and pick up a set. But I think you need the adaptor kit either way to pre-load the wheel bearings. Mile Marker 449 Stainless Steel Hubs. For those that are considering replacing your stock automatic hubs with manual hubs, the following outlines the procedure for making this swap. First, this conversion is extremely easy and does not require any more tools than are commonly avail