Installation, Operation & Maintenance Instructions 1000°C - 1100°C Furnaces types AAF, OAF, GSM & VMF This manual is for the guidance of operators of the above Carbolite products and should be read before the furnace is connected to the electricity supply. CONTENTS Section page 1.0 Descriptions 2 2.0 Installation 3 3.0 Operation 4 Furnace Carbolite CWF 11/13 standard chamber, horizontal sample orientation, 1 zone, MaxT 1100°C, 13l chamber capacity, triple phase 380-415V power supply Carbolite CTF 12/100/900 tube furnace 1200C, heated length 900mm, inbuilt tube 100mm internal diameter. Carbolite Gero CTF 12/100/900 is a large horizontal single zone furnace. Maximum temperature is 1200C, with a continuous operating temperature of 1100C. Heat up time is 90 minutes. Uniform length is 455 mm plus or minus 5c. Save carbolite furnace to get e-mail alerts and updates on your eBay Feed. + Items in search results. Carbolite VST 12/400 1200°C Max Temp, 2000 W, Vertical Split Furnace. Pre-Owned. $1,599.00. or Best Offer. Free Shipping. The ELF laboratory furnaces comprise 3 bench mounted models designed for light duty and general use up to 1100 °C. These laboratory furnaces have a simple drop down door and a top mounted ceramic chimney. The combination of low thermal mass insulation and free radiating wire elements embedded in the chamber sides provide efficient heating. CWF, BWF, RWF . 6 . MF02 - 3.19 . 3.4 Atmospheres . When an optional gas inlet is fitted there is a label near the inlet saying "INERT GAS ONLY". In practice inert or oxidising gases may be used, but not combustible or toxic gases.Chamber furnaces are not gas tight, so it should be understood that gas usage may be high, and that the chamber is likely always to contain some air. Carbolite LHT 5/120 High Temperature Laboratory Oven, 120 litres capacity. Carbolite Gero LHT 5/120 is a bench mounted oven having a maximum continuous temperature of 500C. The oven features a powerful fan driving ai