1734-IB8S POINT I/O Guard I/O Safety Module Current Sinking Current Sourcing Open 8 Inputs/Module 24 Volts DC (nom) A and B 2.2 ounces 3.03 x 0.98 x 2.17 (inches) 3.4 Watts DO Supply Inc. DOES NOT WARRANT THE COMPLETENESS, TIMELINESS OR ACCURACY OF ANY OF THE DATA CONTAINED on this PDF document. Catalog Numbers 1734-IB8S, 1734-OB8S, 1734-IE4S Important User Information Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this equipment before you install, configure, operate, or maintain this product. The 1734-IB8S has a maximum thermal dissipation of 11.62 BTU/hour and it weighs 62.4 grams or 2.2 ounces. It has a nominal input voltage of 24 Volts DC, an input current maximum of 175 mA, and a 3.4 W maximum power dissipation. The 1734-IB8S works with SmartGuard, GuardLogix, and Compact GuardLogix controllers and it is used in POINT I/O A-B 1734-IB8S Safety input module. Introduction. interface The digital device that connects the programmable controller, uses the display screen to display, writes the operation parameters or inputs the operation instructions through the input unit (such as touch screen, keyboard, mouse, etc.), and completes the information interaction between human and machine is called man-machine interface 1734-ib8 installation manual Point IO is a critical component of a distributed control system. This hardware component from Rockwell Automation allows the end user to add nodes of inputs and outputs to their system within proximity of field devices. By doing so, costs of installation are reduced and the need of multiple PLCs is the 1794- ib8s by allen bradley is a sensor input module used to increase the number of processes running at the same time. related manuals for allen- bradley 1734- ib8s. allen- bradley, rockwell automation 1734- ib8s/ a refurbished and repair service. throughout this manual we use notes to make you aware of safety considerations.