Tools that range from a simple square bar of steel with a dowel pin inserted so I can knurl up to a shoulder to a Scissor Style knurl from the ol' manual machines. I have most everything in between as well, Southbend Bump knurls and Warner Swayze Turret machine Box Knurling Heads and a box of Screw machine knurling tools.

The knurl should be fed to full depth as rapidly as permissible without causing undue pressure on the work, the tools, and the equipment. Too many revolutions may result in a roughened or slivered tooth surface and destruction of the knurl and the knurling tool. The rate of feed is governed by the type of material being I didn't spend much time on it other than correctly specifying the dimensions and type on the drawing and occasionally referring to the "Old Standard", Machinery's Handbook for detail. So, with a Mini-lathe and knurling tools at hand, I went back to the Machinery's Handbook to start my journey which had many twist and turns to get here. Please read through the Instructions for Use carefully before using the QUICK knurling tools! The instructions have been written for operators with qualified training in the field of machining and cutting. Compliance with the Instructions for Use increases reliability in use, increases the service life of tools, and prevents downtimes. OMEX New 1/16" - 2.1/4" Scissor Type Lathe Knurling Tool Holder - Quick Action. $64.99 $ 64. 99. Get it as soon as Tomorrow, Mar 20. FREE Shipping by Amazon. Only 2 left in stock - order soon. HFS (R) Adjustable Knurling Tool Holder Large Capacity. Straddle Knurl Holders. Note: If you will be axially feeding tools to produce a knurl pattern wider than the tool itself we recommend using "Convex" axial feed style knurls. Heavy Duty Straddle Holders - Inch Series OPERATING INSTRUCTIONS ©2016 Accu Trak Tool Corp. Guys, do any of you have opinions or actual experience with the #3770 Scissors Type Knurling Tool sold by the Little Machine Shop? I'm thinking abou